HP DesignJet 800 PS3 Printer Driver for Windows 
2000
English

The HP DesignJet 800 PS3 Printer Driver enables you to print 
documents from any Windows 2000 application to a PostScript 
printer.  

System Requirements

--	Microsoft Windows 2000 (English versions only)

INSTALLATION INSTRUCTIONS

You should have Windows running and all applications closed.
We recommend rebooting your computer before installing a 
driver.

Standard Installation

1. Insert the CD-ROM into the CD-ROM drive and follow the 
instructions that appear on your screen.

2. If no instructions appear on your screen, run the setup.exe 
program on the CD-ROM.

Manual Installation

If you cannot or prefer not to use the standard installation
process, you can install the driver from the CD-ROM by 
following these steps:

1. If the output you send to the printer will go directly to the 
printer by network without being stored on another 
computer, you must create a network port before installing 
the driver (consult your network documentation or network 
administrator).

2. Click Start, Settings, and then Printers to open the Printers 
dialog box.

3. Double-click the Add Printer icon to open the Add Printer 
Wizard dialog box. (We recommend that you do not use 
the New Driver button in the Printer Properties dialog box 
to install or upgrade this driver.)

4. Follow the steps displayed on your screen, answering the 
questions as appropriate. 

Below is some basic advice for some of the questions that you 
may be requested to answer, depending on your system 
configuration.

You may be asked whether your printer is connected 
directly to your computer, or connected indirectly through 
another computer. 

Select:

* "My computer" or "Local printer" if the output you send to the
printer will go directly to the printer by cable or network
without being stored on another computer.

* "Network printer" if you will send output to the printer via
another computer. In this case, all settings for the printer are
managed by a printer server that has been set up by an
administrator.

You may be asked the manufacturer and model of your 
printer.

Click Have Disk...

In the Install From Disk dialog box, enter the location of the
driver on the CD-ROM (the same folder as this ReadMe file) 
and click OK. Select your HP DesignJet printer from the list 
and click Next.

If you want to install several drivers you will need to repeat
this procedure.

You may be asked whether you want to keep the existing 
driver or use the new one.

Select "Replace existing driver".

If you are installing files for a new version and you see this
question, we recommend replacing the existing driver.

You may be asked whether you want to print a test page.

We recommend that you select "Yes". By printing a test page 
you will test the communications link between your system and 
the printer.

If you are sharing the driver with Windows 95 or 98, you may 
be informed that a file from Windows 95 or 98 is needed. All 
the necessary files are located one folder up from this ReadMe 
file, in the "Win95" folder.