HP DesignJet 5000PS/800PS Windows NT driver This ReadMe file includes last-minute information. "Unrecognized error 10035" WHILE PRINTING USING IP OR IPX PRINT PATHS If you send several print jobs to the printer at the same time using the IP or IPX print paths, the following error message may be shown on the computer: "Error writing to <printer name> for <print job name>: Unrecognized error 10035. Do you wish to retry or cancel the job?" The message occurs with Windows NT 4.0 and Windows 2000, and can also be seen if several print jobs are sent to the printer at the same time from different sources. If you see this message, click "Retry" to continue with the job. If you are printing using IPX and encounter this problem frequently, we recommend that you print using the IP protocol instead. FREEHAND The driver settings are not applied to the job. You are recommended to upgrade to Freehand 8.0.1 or Freehand 9.0. With Freehand 8.0.1, you should change the driver settings in the spooler under "Document Defaults". FREEHAND WITH LOCALIZED PPDS Freehand has problems with localized PPDs, it is not possible to change the PPD settings inside Freehand. Workaround: use English PPD instead. LAYOUT INFORMATION The image in Layout View should rotate when the Orientation is changed from Portrait to Landscape and vice versa. If the page size is changed, the image size in the Layout View should also change. PROFILE NAMES The following table describes the ICC Profiles supplied by HP in the Color folder: HP105HCP.icm HP 1055/1050 CM Heavy Coated Paper HP105HGP.icm HP 1055/1050 CM High Glossy Photo HPCPHC.icm HP DesignJet CP Heavy Coated HPCPHG.icm HP DesignJet CP High Glossy HPCPSG.icm HP DesignJet CP Semi Glossy Copyright 2000 Hewlett-Packard Company